Construction
Avalon Pontoons offers these exclusive heavy duty construction features
Exclusive! Aluminum seat frames and kick panels
Clearly superior. Lifetime warranty. Aluminum seat frames are stronger, have extra large compartments for maximum storage capacity and have "Flo thru™" ventilation from the outside. "Flo thru™" allows your equipment to dry out, even while the cover is on and keeps the entire compartment drier so mildew or fungus is less likely to develop. Aluminum frames won't crack or hold water like plastic, either!
Heavy duty nose cone with our industry-first integrated nose cone splash fins!
The absolute strongest in the industry. The .100" thickness and one-piece construction makes it virtually impossible to break off a splash fin. The double wrapped leading edge provides maximum impact protection.
Stronger! Double full pontoon connectors
Most models feature full riser pontoon connections inside and outside. Unlike our competitor's "small but skirted" riser connectors. Full risers provide continuous strength along the entire pontoon.
Exclusive! Deco Series side keel protection
Special welded keels protect against damage from side impact. They also provide better performance as they limit the flow of water around the pontoon.
Interior drain
Avalon now exclusively has a drain in the corner of the rear bench where water that would collect from rain during storage is expelled through a drain channel and off the boat. This significantly reduces the potential for stains that develop in the corners over time.
Double vented gas fill
Only Avalon has solved the issue of fuel fill splash back and slowness. Avalon's exclusive double fuel vent allows pressure to escape so you can fill quickly with almost no splash back.
Reflective safety striping
Avalon adds an additional level of night safety with striping that can be seen from a distance when exposed to light.
Industry's strongest double bolted motor pod assembly
.190" thickness with integrated splash fins. 2" thick aluminum sheathed transom is fully welded. The entire pod is double bolted with at least 16 3/8" bolts and supported by more heavy-duty "C" channels crossbeams than any other pontoon boat.
Superior quality pontoon tube
.090" thickness H5052 marine aluminum alloy. Multi-baffled near each weld for maximum strength and air lock. Hand-welded to rigid standards.
The best crossbeam and deck construction
Avalon "Deco" Series pontoon boats feature the latest in heavy-duty hull construction. 3" high, extreme thickness "C" channel crossbeams are bolted to the full riser with heavy-duty stainless bolts, nuts and washers. Then 3/4", pressure injected, lifetime guaranteed flooring is bolted to the crossbeams using superior grade stainless steel bolts secured permanently with stainless nylock lock nuts and washers.
Strongest bow eye
Our standard equipment stainless bow eye is connected across three crossbeams with a 1/4" aluminum reinforcement strap. Excellent strength for haul-out.
Wall joints
Wall joints welded on all four sides for extra strength.
|
|
|
